<dfn id="tzabw"></dfn>

<form id="tzabw"><input id="tzabw"></input></form>

歡迎訪問濟南科爾超聲波設備有限公司網站！

公司簡介|聯系我們

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

多槽手動超聲波清洗機清洗物件注意三點

作者：admin來源：http://m.zhuohengsh.com/時間：2022-12-01

在很多領域都可以使用多槽手動超聲波清洗機來進行物品的清洗，因為這樣清洗出來的物品比手工清洗的潔凈程度更高，但是要想獲得更好的清洗質量，大家除了要按照要求來進行操作各項程序之外，還需要了解多槽式超聲波清洗機的這些使用注意事項。

In many fields, the multi tank ultrasonic cleaner can be used to clean items, because the items cleaned in this way are more clean than those manually cleaned. However, in order to obtain better cleaning quality, in addition to operating procedures according to requirements, we also need to know these precautions for the use of the multi tank ultrasonic cleaner.

1.清洗籃

1. Cleaning basket

在使用多槽式超聲波清洗機清洗一些較小的零件物品時經常需要使用清洗筐，但是清洗筐上的網眼會引起超聲衰減，所以要特別引起注意，注意選擇網眼大小合適的清洗籃，此外建議選用不銹鋼材質的清洗籃，盡量不要使用塑膠框，這樣能夠防止靜電的產生。

When using a multi slot ultrasonic cleaner to clean some small parts, it is often necessary to use a cleaning basket. However, the mesh on the cleaning basket will cause ultrasonic attenuation, so special attention should be paid to the selection of a cleaning basket with an appropriate mesh size. In addition, it is recommended to use a stainless steel cleaning basket and try not to use a plastic frame to prevent static electricity.

2.清洗時間

2. Cleaning time

通常在清洗時每道工序的時間定為三至五分鐘，如果被清洗物品的表面積比較大，或者工件的結構較為復雜時，要注意根據實際情況酌情調整多槽式超聲波清洗機的清洗時間。若被清洗物容易出現重疊以及粘附的現象，那么在將被清洗物放入及取出槽液的時候可以抖動一下工件，讓清洗劑充分與工件接觸以提高清洗效果。

Generally, the cleaning time of each process is set as three to five minutes. If the surface area of the object to be cleaned is large or the structure of the workpiece is complex, the cleaning time of the multi slot ultrasonic cleaner should be adjusted according to the actual situation. If the objects to be cleaned are prone to overlap and adhesion, shake the workpiece when putting the objects to be cleaned into and taking out the bath solution, so that the cleaning agent can fully contact the workpiece to improve the cleaning effect.
多槽式超聲波清洗機

3.加液和串槽

3. Liquid filling and channeling

用多槽式超聲波清洗機清洗工件要注意槽液不能加得太滿，以免發生兩槽超聲波清洗劑之間相互混合以及瀝干時清洗筐底部黏液的現象。此外，多槽式超聲波清洗機的每個槽應為獨立的操作工序，注意不要將兩槽清洗劑相互串用或人為減少操作工序以及清洗的操作時間。

When using a multi tank ultrasonic cleaner to clean workpieces, it should be noted that the tank solution should not be too full, so as to avoid the phenomenon that the ultrasonic cleaning agents in the two tanks are mixed with each other and the mucus at the bottom of the cleaning basket is drained. In addition, each tank of the multi tank ultrasonic cleaner shall be an independent operation process. Be careful not to use the cleaning agent of the two tanks in series or reduce the operation process and cleaning time artificially.

多槽式超聲波清洗機盡管擁有非常高的清潔性能，但那是在按照及規定和要求進行操作的情況下，只有在使用超聲波清洗機清洗工件時按程序執行才會得到好的清洗效果。更多相關內容就來我們網站m.zhuohengsh.com咨詢吧！

Although the multi slot ultrasonic cleaning machine has very high cleaning performance, it can only get good cleaning effect when the ultrasonic cleaning machine is used to clean the workpiece according to the procedures under the condition of operating according to the regulations and requirements. For more information, please visit our website m.zhuohengsh.com!

上一篇：低溫廢水回收設備的維護方法
下一篇：運行碳氫清洗機前后的注意事項