歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

全自動超聲波清洗機的制作過程

作者：admin來源：http://m.zhuohengsh.com/時間：2023-04-06

隨著全自動超聲波清洗機的應用越來越廣，很多企業現在已經離不開超聲波清洗設備了，但是全自動超聲波清洗機是怎樣制作而成的呢，全自動超聲波清洗機的制作過程是怎樣的呢，下面我們就全自動超聲波清洗機的制作過程進行簡單介紹。

With the increasing application of fully automatic ultrasonic cleaning machines, many enterprises can no longer do without ultrasonic cleaning equipment. However, how is a fully automatic ultrasonic cleaning machine made? What is the production process of a fully automatic ultrasonic cleaning machine? Below, we will briefly introduce the production process of a fully automatic ultrasonic cleaning machine.

全自動超聲波清洗機槽體的制作：

Production of fully automatic ultrasonic cleaning machine tank:

先需要購買304或者316的不銹鋼鋼板，因為全自動超聲波清洗機外圍都是不銹鋼制作而成。訂購回來之后，就進行加工，根據需要制作超聲波清洗槽的尺寸，用剪板機進行剪切到需要尺寸，然后對剪切好的板材進行加工，先需要折彎，根據槽體尺寸折彎到一定程度，開始制作槽體，需要把折彎好的不銹鋼件進行焊接，制作成全自動超聲波清洗機槽體。需要不銹鋼方通做支架，然后把槽體固定在上面。

First, you need to purchase 304 or 316 stainless steel plates, as the periphery of the fully automatic ultrasonic cleaning machine is made of stainless steel. After the order is placed, it is processed and the size of the ultrasonic cleaning tank is made according to the needs. The plate is cut to the required size using a shearing machine, and then the cut plate is processed. First, it needs to be bent and bent to a certain extent according to the tank size to start making the tank. The bent stainless steel parts need to be welded to create a fully automatic ultrasonic cleaning machine tank. We need a stainless steel square tube as a support, and then fix the tank body on it.

當槽體成形后，開始在設計超聲波換能器（俗稱：振子、震頭）位置，根據槽體大小，分為單邊震式、雙邊震式或底震式，根據需要而定，在需要裝震頭的那面板上，開始焊接連接震頭的螺絲，完成后，開始粘貼震頭膠，在連接震頭螺絲的周圍，之后就開始裝震頭，每個螺絲位裝一個震頭。

After the tank body is formed, start to weld the screws connecting the vibration head on the panel where the vibration head needs to be installed. After that, start to paste the vibration head glue around the screws connecting the vibration head, and then start to install the vibration head.
全自動超聲波清洗機

震頭裝好后，開始接連接震頭的線，完成后。裝加熱裝置，根據需要選擇合適的加熱板。以上完成后，開始接加熱的線和超聲波機器的線，并且開始配外面的門板，還有溫控開關，和全自動超聲波清洗機的腳輪腳杯等。

After the shock head is installed, start connecting the wires to the shock head, and after completion. Install a heating device and select a suitable heating plate as needed. After the above is completed, start connecting the heating wire and the wire of the ultrasonic machine, and start matching the external door panel, temperature control switch, and the caster foot cup of the fully automatic ultrasonic cleaning machine.

經過一系列的過程，一臺全自動超聲波清洗機基本成型了。其實這樣還不算，還需要調試，全自動超聲波清洗機每臺都要經過48小時以上的調試時間，保證設備無故障出廠。您有設備需求可以來我們網站http://m.zhuohengsh.com留言咨詢！

After a series of processes, a fully automatic ultrasonic cleaning machine has been basically formed. In fact, this is not enough, it still needs to be debugged. Each fully automatic ultrasonic cleaning machine needs to go through more than 48 hours of debugging time to ensure that the equipment leaves the factory without any faults. You can come to our website if you have equipment requirements http://m.zhuohengsh.com Leave a message for consultation!

上一篇：使用單工位旋轉噴淋清洗機要避免一定的誤區
下一篇：低溫廢水回收設備的保養維修從哪里了解？